Radius Recycling Reports Second Quarter Fiscal 2025 Financial Results

Ferrous and Finished Steel Sales Volumes Up Year-Over-Year Positive Operating and Free Cash Flow Radius Board Declares Quarterly Dividend PORTLAND, Ore., April 04, 2025 (GLOBE NEWSWIRE) -- Radius Recycling, Inc. (NASDAQ: RDUS) (“Radius” or the “Company”) today reported results for the second quarter of fiscal 2025 ended February 28, 2025. The Company reported a loss per share from continuing operations of $(1.15) and a net loss of $(33) million in the second quarter of fiscal 2025, compared to ($1.19) and ($34) million, respectively, in the prior year second quarter. Adjusted EBITDA was approximately break-even in the second quarter of fiscal 2025, compared to $3 million in the prior year second quarter. Adjusted loss per share from continuing operations was $(0.99) in the second quarter of fiscal 2025, compared to ($1.04) in the prior year second quarter. On a year-over-year basis, operating performance in the second quarter of fiscal 2025 was slightly lower primarily due to lower global ferrous and finished steel prices, including as a result of the dampening effect from elevated levels of Chinese steel exports, partially offset by higher ferrous and finished steel sales volumes, stronger nonferrous demand, and benefits from productivity initiatives: Ferrous average net selling prices were 14% lower year-over-year. This, together with tight scrap flows exacerbated by particularly challenging winter weather conditions, led to a compression in metal spreads compared to the prior year quarter. Domestic and export market conditions diverged in the latter part of the quarter, as domestic ferrous scrap prices increased sharply and mills began restocking. This surge supported margin expansion on domestic shipments, but also contributed to a temporary spread compression on export sales that had already been contracted for the quarter. The impact of average inventory accounting in the second quarter of fiscal 2025 was approximately neutral, compared to a benefit of approximately $2 per ferrous ton in the second quarter of fiscal 2024.Ferrous sales volumes were 12% higher compared to the prior year quarter, primarily benefiting from a reduction in inventories due to timing of shipments.Stronger nonferrous demand led to 10% higher average net selling prices. Nonferrous sales volumes were 1% lower year-over-year primarily due to timing of shipments.The contribution from finished steel was lower year-over-year primarily due to a decline in average net selling prices of 9%, although finished steel prices began to rise in the latter part of the quarter. This was partially offset by 15% higher finished steel sales volumes year-over-year as demand in the Company’s Western markets remained healthy. The mill utilization rate was 88% in the second quarter of fiscal 2025, compared to 81% in the prior year’s second quarter.The second quarter of fiscal 2025 reflected the full contribution from the Company’s productivity initiatives implemented over the past year, which were the main drivers of the 12% reduction in consolidated Selling, General, and Administrative (SG&A) costs compared to the prior year quarter. Results for the second quarter of fiscal 2025 also included a $3 million gain from the Company’s asset monetization program, while the prior year second quarter had included a $2 million gain from insurance recoveries. In the second quarter of fiscal 2025, the Company generated positive operating cash flow of $20 million, including a benefit to working capital primarily associated with a reduction in inventories on timing of shipments, and free cash flow of $13 million. Total debt was $430 million at the end of the quarter, and debt, net of cash, was $424 million. Capital expenditures were $11 million in the quarter. The effective tax rate for the second quarter of fiscal 2025 was a benefit of 11% on a pre-tax loss. While the Company continues to be in a valuation allowance position, the tax rate in the second quarter included a favorable true-up resulting primarily from a change in estimates of projected full year performance used in its annual effective tax rate method. During the second quarter of fiscal 2025, the Company returned capital to shareholders through its 124th consecutive quarterly dividend. Declaration of Quarterly DividendThe Board of Directors declared a cash dividend of $0.1875 per common share, payable May 5, 2025 to shareholders of record on April 21, 2025. The Company has paid a dividend every quarter since going public in November 1993. Merger UpdateOn March 13, 2025, the Company entered into an Agreement and Plan of Merger (the “Merger Agreement”) with Toyota Tsusho America, Inc. (“TAI”) pursuant to which, on the terms and subject to the conditions set forth in the Merger Agreement, the Company would become a wholly owned subsidiary of TAI (the “Merger”). The Board of Directors of the Company has approved the Merger Agreement and the transactions contemplated thereby, including the Merger. Subject to the satisfaction of the closing conditions, the Company anticipates the Merger to close in the second half of calendar 2025. Earnings Conference CallAs a result of the pending Merger with TAI, the Company will not be holding a second quarter earnings conference call or webcast. About Radius Recycling, Inc.Radius is a leading North American recycler of ferrous and nonferrous metals with 53 operating facilities across 25 states, Puerto Rico, and Western Canada. The Company sells its products to U.S. and export customers from its locations on both the East and West Coasts of the U.S., the Southeast, Hawaii, and Puerto Rico. Radius’ integrated operating platform also includes 50 stores operating across the U.S. and Western Canada under its Pick-N-Pull brand which sell serviceable used auto parts from salvaged vehicles and receive over 4 million annual retail visits. The Company’s electric arc furnace and rolling mill located in McMinnville, Oregon is vertically integrated with its Pacific Northwest metals recycling operations and produces rebar, wire rod, and other specialty products that are sold to customers primarily in the Western U.S. and Western Canada. Radius began operations in 1906 in Portland, Oregon, where it remains headquartered. Summary Results ($ in millions, except per share and per ferrous ton amounts) Quarter Six Months ended 2Q25 1Q25 2Q24 2025 2024 Revenues $643 $657 $621 $1,299 $1,294 Gross margin (total revenues less cost of goods sold) $27 $33 $40 $61 $80 Selling, general and administrative expense $55 $57 $62 $112 $125 Net income (loss) $(33) $(37) $(34) $(70) $(52)Net income (loss) per ferrous ton(5) $(30) $(33) $(35) $(32) $(24)Diluted income (loss) per share from continuing operations attributable to Radius shareholders Reported $(1.15) $(1.30) $(1.19) $(2.45) $(1.83)Adjusted(1) $(0.99) $(1.33) $(1.04) $(2.32) $(1.68)Adjusted EBITDA(1) $— $— $3 $— $4 Adjusted EBITDA per ferrous ton(1) (5) $— $— $3 $— $2 Cash flows from (used in) operating activities $20 $(2) $(55) $18 $(56) Ferrous sales volumes (LT, in thousands)(2) 1,094 1,106 980 2,200 2,132 Avg. net ferrous sales prices ($/LT)(3) $330 $338 $384 $334 $368 Nonferrous sales volumes (pounds, in millions)(2) (4) 174 177 176 352 358 Avg. nonferrous sales prices ($/pound)(3) (4) $1.03 $1.02 $0.94 $1.02 $0.93 Finished steel average net sales price ($/ST)(3) $756 $775 $832 $765 $832 Finished steel sales volumes (ST, in thousands) 131 125 114 256 243 Rolling mill utilization (%) 88% 81% 81% 84% 88% LT = Long Ton, which is equivalent to 2,240 poundsST = Short Ton, which is equivalent to 2,000 pounds (1) See Non-GAAP Financial Measures for reconciliation to U.S. GAAP.(2) Ferrous and nonferrous volumes sold externally and delivered to our steel mill for finished steel production.(3) Price information is shown after netting the cost of freight incurred to deliver the product to the customer.(4) Nonferrous sales volumes and average nonferrous prices excludes platinum group metals (“PGMs”) in catalytic converters.(5) May not foot due to rounding. RADIUS RECYCLING, INC.CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS($ in thousands, except per share amounts)(Unaudited) Three Months Ended Six Months ended February 28,2025 November 30,2024 February 29,2024 February 28,2025 February 29,2024 Revenues $642,508 $656,537 $621,059 $1,299,045 $1,293,956 Cost of goods sold 615,011 623,132 580,996 1,238,143 1,214,416 Selling, general and administrative expense 54,943 56,684 62,160 111,627 125,262 (Income) from joint ventures (188) (448) (30) (636) (703)Asset impairment charges — 184 1,476 184 1,476 Restructuring charges and other exit-related activities 1,422 1,897 3,175 3,319 3,210 Operating income (loss) (28,680) (24,912) (26,718) (53,592) (49,705)Interest expense (8,771) (8,862) (5,803) (17,633) (10,613)Other income (expense), net 209 636 (263) 845 (432)Income (loss) from continuing operations before income taxes (37,242) (33,138) (32,784) (70,380) (60,750)Income tax (expense) benefit 4,277 (3,791) (1,195) 486 8,975 Income (loss) from continuing operations (32,965) (36,929) (33,979) (69,894) (51,775)Income (loss) from discontinued operations, net of tax — — (31) — (33)Net income (loss) (32,965) (36,929) (34,010) (69,894) (51,808)Net (income) loss attributable to noncontrolling interests (12) (244) 31 (256) (135)Net income (loss) attributable to Radius shareholders $(32,977) $(37,173) $(33,979) $(70,150) $(51,943) Net income (loss) per share attributable to Radius shareholders: Basic: Income (loss) per share from continuing operations $(1.15) $(1.30) $(1.19) $(2.45) $(1.83)Net income (loss) per share $(1.15) $(1.30) $(1.19) $(2.45) $(1.83)Diluted: Income (loss) per share from continuing operations $(1.15) $(1.30) $(1.19) $(2.45) $(1.83)Net income (loss) per share $(1.15) $(1.30) $(1.19) $(2.45) $(1.83)Weighted average number of common shares: Basic 28,684 28,573 28,454 28,628 28,337 Diluted 28,684 28,573 28,454 28,628 28,337 Dividends declared per common share $0.1875 $0.1875 $0.1875 $0.3750 $0.3750 RADIUS RECYCLING, INC.SELECTED OPERATING STATISTICS(Unaudited) YTD 1Q25 2Q25 2025 Total ferrous volumes (LT, in thousands)(1) 1,106 1,094 2,200 Total nonferrous volumes (pounds, in thousands)(1)(2) 177,255 174,323 351,578 Ferrous selling prices ($/LT)(3) Domestic$331 $353 $343 Foreign$340 $321 $330 Average$338 $330 $334 Ferrous sales volume (LT, in thousands) Domestic 477 468 945 Foreign 629 626 1,255 Total 1,106 1,094 2,200 Nonferrous average price ($/pound)(2)(3)$1.02 $1.03 $1.02 Cars purchased (in thousands)(4) 56 60 116 Auto stores at period end 50 50 50 Finished steel average sales price ($/ST)(3)$775 $756 $765 Sales volume (ST, in thousands) Rebar 85 85 170 Coiled products 39 45 84 Merchant bar and other 1 1 2 Finished steel products sold 125 131 256 Rolling mill utilization(5) 81% 88% 84% LT = Long Ton, which is equivalent to 2,240 poundsST = Short Ton, which is equivalent to 2,000 pounds (1) Ferrous and nonferrous volumes sold externally and delivered to our steel mill for finished steel production.(2) Excludes PGMs in catalytic converters.(3) Price information is shown after netting the cost of freight incurred to deliver the product to the customer.(4) Cars purchased by auto parts stores only.(5) Rolling mill utilization is based on effective annual production capacity under current conditions of 580 thousand tons of finished steel products. RADIUS RECYCLING, INC.SELECTED OPERATING STATISTICS(Unaudited) YTD 1Q24 2Q24 3Q24 4Q24 2024(6) Total ferrous volumes (LT, in thousands)(1) 1,152 980 1,112 1,249 4,493 Total nonferrous volumes (pounds, in thousands)(1)(2) 181,728 176,477 183,230 206,743 748,178 Ferrous selling prices ($/LT)(3) Domestic $342 $391 $341 $323 $349 Foreign $359 $381 $354 $356 $361 Average $354 $384 $350 $348 $358 Ferrous sales volume (LT, in thousands) Domestic 535 483 528 504 2,051 Foreign 617 497 584 744 2,442 Total(6) 1,152 980 1,112 1,249 4,493 Nonferrous average price ($/pound)(2)(3) $0.91 $0.94 $1.04 $1.08 $1.00 Cars purchased (in thousands)(4) 64 67 64 63 258 Auto stores at period end 50 50 50 50 50 Finished steel average sales price ($/ST)(3) $831 $832 $817 $795 $818 Sales volume (ST, in thousands) Rebar 94 83 83 96 357 Coiled products 34 30 42 43 148 Merchant bar and other 1 1 1 1 4 Finished steel products sold 129 114 126 140 509 Rolling mill utilization(5) 95% 81% 88% 97% 90% LT = Long Ton, which is equivalent to 2,240 poundsST = Short Ton, which is equivalent to 2,000 pounds (1) Ferrous and nonferrous volumes sold externally and delivered to our steel mill for finished steel production.(2) Excludes PGMs in catalytic converters.(3) Price information is shown after netting the cost of freight incurred to deliver the product to the customer.(4) Cars purchased by auto parts stores only.(5) Rolling mill utilization is based on effective annual production capacity under current conditions of 580 thousand tons of finished steel products.(6) May not foot due to rounding. RADIUS RECYCLING, INC.CONDENSED CONSOLIDATED BALANCE SHEETS($ in thousands)(Unaudited) February 28, 2025 August 31, 2024 Assets Current assets: Cash and cash equivalents $5,437 $5,552 Accounts receivable, net 216,365 258,157 Inventories 281,757 293,932 Other current assets 42,602 51,486 Total current assets 546,161 609,127 Property, plant and equipment, net 654,523 672,192 Operating lease right-of-use assets 130,686 123,546 Goodwill 13,105 13,105 Other assets 113,708 115,799 Total assets $1,458,183 $1,533,769 Liabilities and Equity Current liabilities: Short-term borrowings $5,480 $5,688 Accounts payable 193,063 202,498 Environmental liabilities 12,706 13,232 Operating lease liabilities 21,159 19,262 Other current liabilities 69,661 75,890 Total current liabilities 302,069 316,570 Long-term debt, net of current maturities 424,424 409,082 Environmental liabilities, net of current portion 52,172 52,417 Operating lease liabilities, net of current maturities 110,799 104,246 Other long-term liabilities 23,715 25,714 Total liabilities 913,179 908,029 Total Radius Recycling, Inc. shareholders' equity 542,716 623,112 Noncontrolling interests 2,288 2,628 Total equity 545,004 625,740 Total liabilities and equity $1,458,183 $1,533,769 Non-GAAP Financial MeasuresThis press release contains performance based on adjusted diluted earnings per share from continuing operations attributable to Radius shareholders, adjusted EBITDA, adjusted EBITDA per ferrous ton, and adjusted selling, general, and administrative expense, which are non-GAAP financial measures as defined under SEC rules. As required by SEC rules, the Company has provided a reconciliation of these measures for each period discussed to the most directly comparable U.S. GAAP measure. Management believes that providing these non-GAAP financial measures adds a meaningful presentation of our results from business operations excluding restructuring charges and other exit-related activities, charges for legacy environmental matters (net of recoveries), amortization of capitalized cloud computing implementation costs, asset impairment charges, business development costs not related to ongoing operations including pre-acquisition and merger expenses, and the income tax benefit allocated to these adjustments, items which are not related to underlying business operational performance, and improves the period-to-period comparability of our results from business operations. We believe that presenting debt, net of cash is useful to investors as a measure of our leverage, as cash and cash equivalents can be used, among other things, to repay indebtedness. We define free cash flow as cash flow from operating activities, net of capital expenditures and proceeds from sales of property, plant, and equipment. We believe free cash flow is useful to investors as a measure of liquidity. These non-GAAP financial measures should be considered in addition to, but not as a substitute for, the most directly comparable U.S. GAAP measures. Reconciliation of adjusted diluted earnings (loss) per share from continuing operations attributable to Radius shareholders ($ per share) Three Months Ended Six Months ended 2Q25 1Q25 2Q24 2025 2024 As reported $(1.15) $(1.30) $(1.19) $(2.45) $(1.83)Restructuring charges and other exit-related activities, per share 0.05 0.07 0.11 0.12 0.11 Charges (recoveries) for legacy environmental matters, net, per share(1) (0.01) (0.07) 0.01 (0.08) 0.02 Asset impairment charges, per share — — 0.06 — 0.07 Business development costs, per share 0.09 — — 0.09 0.01 Income tax benefit allocated to adjustments, per share(3) 0.03 (0.03) (0.03) — (0.06)Adjusted(4) $(0.99) $(1.33) $(1.04) $(2.32) $(1.68) Reconciliation of adjusted EBITDA and adjusted EBITDA per ferrous ton ($ in millions) Three Months Ended Six Months ended 2Q25 1Q25 2Q24 2025 2024 Net income (loss) $(33) $(37) $(34) $(70) $(52)Plus interest expense 9 9 6 18 11 Plus income tax expense (benefit) (4) 4 1 — (9)Plus depreciation and amortization 24 24 24 48 48 Plus business development costs 3 — — 3 — Plus restructuring charges and other exit-related activities 1 2 3 3 3 Plus charges (recoveries) for legacy environmental matters, net(1) — (2) — (2) — Plus amortization of cloud computing software costs(2) — — — 1 — Plus asset impairment charges — — 1 — 2 Adjusted EBITDA(4) $— $— $3 $— $4 Ferrous sales volume (LT, in thousands) 1,094 1,106 980 2,200 2,132 Adjusted EBITDA per ferrous ton sold ($/LT) $— $— $3 $— $2 Reconciliation of Adjusted selling, general and administrative expense: ($ in millions) Three Months Ended Six Months ended 2Q25 1Q25 2Q24 2025 2024 As reported $55 $57 $62 $112 $125 (Charges) recoveries for legacy environmental matters, net(1) — 2 — 2 — Business development costs (3) — — (3) — Adjusted(4) $53 $59 $62 $111 $125 Reconciliation of debt, net of cash ($ in thousands) February 28,2025 November 30,2024 February 29,2024 Short-term borrowings $5,480 $5,573 $5,459 Long-term debt, net of current maturities 424,424 439,872 368,119 Total debt 429,904 445,445 373,578 Less: cash and cash equivalents 5,437 15,223 13,562 Total debt, net of cash $424,467 $430,222 $360,016 Reconciliation of Free Cash Flow (FCF)Three Months Ended ($ in thousands)2Q25 Cash flow from operating activities$19,954 Capital expenditures (11,334)Proceeds from sales of property, plant, and equipment 4,273 Free cash flow$12,893 LT = Long Ton, which is equivalent to 2,240 pounds (1) Legal and environmental charges, net of recoveries, for legacy environmental matters including those related to the Portland Harbor Superfund site and to other legacy environmental loss contingencies.(2) Amortization of cloud computing software costs consists of expense recognized in cost of goods sold and selling, general, and administrative expense resulting from amortization of capitalized implementation costs for cloud computing IT systems. This expense is not included in depreciation and amortization.(3) Income tax allocated to the aggregate adjustments reconciling reported and adjusted diluted (loss) earnings per share from continuing operations attributable to Radius shareholders is determined based on a tax provision calculated with and without the adjustments.(4) May not foot due to rounding. Forward-Looking StatementsStatements and information included in this press release by Radius Recycling, Inc. that are not purely historical are forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934 and are made pursuant to the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995. Except as noted herein or as the context may otherwise require, all references in this press release to “we,” “our,” “us,” “the Company,” “Radius Recycling,” and “Radius” refer to Radius Recycling, Inc. and its consolidated subsidiaries. Forward-looking statements in this press release include statements regarding future events or our expectations, intentions, beliefs, and strategies regarding the future, which may include statements regarding our proposed Merger with TAI, a U.S. subsidiary of Toyota Tsusho Corporation; the impact of equipment upgrades, equipment failures, and facility damage on production, including timing of repairs and resumption of operations; the realization of insurance recoveries; the Company’s outlook, growth initiatives, or expected results or objectives, including pricing, margins, volumes, and profitability; completion of acquisitions and integration of acquired businesses; the progression and impact of investments in processing and manufacturing technology improvements and information technology systems; the impact of sanctions and tariffs, quotas, and other trade actions and import restrictions; the impacts of supply chain disruptions, inflation, and rising interest rates; liquidity positions; our ability to generate cash from continuing operations; trends, cyclicality, and changes in the markets we sell into; strategic direction or goals; targets; changes to manufacturing and production processes; the realization of deferred tax assets; planned capital expenditures; the cost of and the status of any agreements or actions related to our compliance with environmental and other laws; expected tax rates, deductions, and credits; the impact of pandemics, epidemics, or other public health emergencies; the impact of labor shortages or increased labor costs; obligations under our retirement plans; benefits, savings, or additional costs from business realignment, cost containment, and productivity improvement programs; the potential impact of adopting new accounting pronouncements; and the adequacy of accruals. Forward-looking statements by their nature address matters that are, to different degrees, uncertain, and often contain words such as “outlook,” “target,” “aim,” “believes,” “expects,” “anticipates,” “intends,” “assumes,” “estimates,” “evaluates,” “may,” “will,” “should,” “could,” “opinions,” “forecasts,” “projects,” “plans,” “future,” “forward,” “potential,” “probable,” and similar expressions. However, the absence of these words or similar expressions does not mean that a statement is not forward-looking. We may make other forward-looking statements from time to time, including in reports filed with the Securities and Exchange Commission, press releases, presentations, and on public conference calls. All forward-looking statements we make are based on information available to us at the time the statements are made, and we assume no obligation to update any forward-looking statements, except as may be required by law. Our business is subject to the effects of changes in domestic and global economic conditions and a number of other risks and uncertainties that could cause actual results to differ materially from those included in, or implied by, such forward-looking statements. Some of these risks and uncertainties are discussed in “Item 1A. Risk Factors” of Part I of our most recent Annual Report on Form 10-K. and Part II of our most recent Quarterly Report on Form 10-Q. Examples of these risks include: the completion of the Merger is subject to various risks and uncertainties related to, among other things, its terms, timing, structure, benefits, costs and completion; the occurrence of any event, change or other circumstances that could give rise to the termination of the Merger Agreement; the disruption of management’s attention from the Company’s ongoing business operations due to the Merger; the effect of the announcement of the Merger on the Company’s relationships with its customers, third-party suppliers, industrial vendors and other third parties, as well as its operating results and business generally; the potential difficulties in employee retention as a result of the Merger; the Merger Agreement may be terminated in circumstances that may require the Company to pay TAI a termination fee; the fact that, if the Merger is completed, shareholders will forgo the opportunity to realize the potential long-term value of the successful execution of the Company’s current strategy as an independent company; required approvals to complete the Merger by our shareholders and the receipt of certain regulatory approvals, to the extent required, and the timing and conditions for such approvals; the stock price of the Company may decline significantly if the merger is not completed; the possibility that TAI could, at a later date, engage in unspecified transactions, including restructuring efforts, special dividends or the sale of some or all of the Company’s assets to one or more purchasers, that could conceivably produce a higher aggregate value than that available to shareholders in the Merger; the inability to consummate the Merger within the anticipated time period, or at all, due to any reason, including the failure to satisfy the closing conditions to the Merger; potential environmental cleanup costs related to the Portland Harbor Superfund site or other locations; the impact of equipment upgrades, equipment failures, and facility damage on production; failure to realize or delays in realizing expected benefits from capital and other projects, including investments in processing and manufacturing technology improvements and information technology systems; the cyclicality and impact of general economic conditions; the impact of inflation and interest rate and foreign currency fluctuations; changing conditions in global markets including the impact of sanctions and tariffs, quotas, and other trade actions and import restrictions; increases in the relative value of the U.S. dollar; economic and geopolitical instability including as a result of military conflict; volatile supply and demand conditions affecting prices and volumes in the markets for raw materials and other inputs we purchase; significant decreases in recycled metal prices; imbalances in supply and demand conditions in the global steel industry; difficulties associated with acquisitions and integration of acquired businesses; supply chain disruptions; reliance on third-party shipping companies, including with respect to freight rates and the availability of transportation; restrictions on our business and financial covenants under the agreement governing our bank credit facilities; potential limitations on our ability to access capital resources and existing credit facilities; the impact of impairment of goodwill and assets other than goodwill; the impact of pandemics, epidemics, or other public health emergencies; inability to achieve or sustain the benefits from productivity, cost savings, and restructuring initiatives; inability to renew facility leases; customer fulfillment of their contractual obligations; the impact of consolidation in the steel industry; product liability claims; the impact of legal proceedings and legal compliance; the impact of climate change; the impact of not realizing deferred tax assets; the impact of tax increases and changes in tax rules; the impact of one or more cybersecurity incidents; the impact of increasing attention to environmental, social, and governance matters; translation risks associated with fluctuation in foreign exchange rates; the impact of hedging transactions; inability to obtain or renew business licenses and permits; environmental compliance costs and potential environmental liabilities; increased environmental regulations and enforcement; compliance with climate change and greenhouse gas emission laws and regulations; the impact of labor shortages or increased labor costs; reliance on employees subject to collective bargaining agreements; and the impact of the underfunded status of multiemployer plans in which we participate. Company Contact: Investor Relations:Michael Bennett(503) 323-2811mcbennett@rdus.com Public Affairs & Communications:Eric Potashnerwww.radiusrecycling.com ir@rdus.com Company Info:www.radiusrecycling.com ir@rdus.com

Radius Recycling Reports Second Quarter Fiscal 2025 Financial Results

FAQ

Why Bullish?

How important is it?

Why Short Term?

Related Companies

Related News